> HOW TO SET THE TIME AND DATE > How to set the time and date

How to set the time and date

The times on the digital and analog displays are linked.
You can set the analog display time by setting the digital display time.

If the digital display time and the analog display time are out of sync, the standard hand position is misaligned. Set the standard hand position. How to set the standard hand position

  1. Unlock the crown and button.

  2. Press and hold Button Button A to show the time on the digital display.

  3. H855_Set Date and Time-1
  4. Pull out the crown.

  5. The hands on the analog display will stop and “seconds” on the digital display will start flashing.

    H855_Set Date and Time-3
  1. Turn the crown to set the time and calendar.

  2. Press Button Button A, the flashing item that can be set changes.

    H855_Set Date and Time-4-1 + How to set Date_Time 4-1

    Turn clockwise: Time/date moves forwards

    Turn counterclockwise: Time/date moves backwards

H855_Set Date and Time-4-2 V + How to set Date_Time 4-2 V

Second

Minute

Hour

Day

Month

Year

12/24H

Water depth unit

Temperature unit

When setting the seconds, select “Seconds” and turn the crown to set the seconds in accordance with the time signal service.

If you turn the crown while 30 to 59 seconds are shown on the seconds display, one minute is added to the time and the second digits are immediately reset to “00”.

The telephone time signal service is helpful for setting the seconds hand exactly.

Setting the date automatically sets “Day”.

In “12/24H”, “A” (AM) / “P” (PM) can be set.

Temperature and water depth units

  1. Push the crown back in to the normal position.

  2. The hands on the analog display move to the set time and the watch starts to function.

  3. Lock the crown and button.

This watch is equipped with a fully automatic calendar function. As the day of the week, day, month, and year from 2001 to 2100 have been programmed in the automatic calendar, you do not need to manually adjust odd and even months and leap years during this period.

How to set the standard hand position

If the analog display time and digital display time are misaligned, the standard hand position will need to be corrected.

  1. Unlock the crown and button.

  2. Press and hold Button Button A to show the time on the digital display.

  3. H855_Set Date and Time-1
  4. Pull out the crown.

  5. The seconds on the digital display will start flashing.

    H855_Set Date and Time-3
  6. Hold down Button Button B.

  7. After moving, all hands will stop, and “S SET” will start flashing on the digital display.

    H855_Set Hand-1
  1. Set all hands to the 12 o’clock standard position.

    1. Turn the crown to advance the seconds hand to the 12 o’clock position.
      (Proceed to Num2 if the seconds hand is already in this position)

    2. The seconds hand will not move if the crown is turned counterclockwise.

    3. Press Button Button A to select the hand not aligned with the standard position.

    4. The selected hand moves slightly to indicate that it is ready to be aligned.

    5. Turn the crown to set the hand to the 12 o’clock position.

    H855_Set Hand-2 + Set Hand-2

    Aligning the seconds hand

    Aligning the minute hand

    Aligning the hour hand

    H855_Set Hand-2 V + Set Hand-2 V

    Aligning the seconds hand

    Aligning the minute hand

    Aligning the hour hand

  1. Push the crown back in to the normal position.

  2. The hands on the analog display move to the current time and the watch starts to function.

  3. Lock the crown and button.

Listening to the Alarm Tone and Setting the Time Signal Service/Operation Confirmation Sound

Listening to the alarm tone

When the digital display is showing the time, holding down Button Button A and Button Button B at the same time enables you to listen to the alarm tone.

 

H855_How to test Alarm sound + How to test Alarm sound

The alarm symbol will start flashing

Setting the time signal service/operation confirmation sound

When the digital display is showing the time, pressing Button Button A and Button Button B at the same time enables you to set and turn off the time signal service/operation confirmation sound.

 

H855_Set Confirmation sound + Set Confirmation sound

Time signal service symbol

The alarm tone will sound when setting the time signal service/operation confirmation sound, but this is not an error.

The alarm tones are the same for the time alarm and diving timer alarm. How to use the alarm

The time alarm and time signal will not sound while in diving mode.