> TO PRESERVE THE QUALITY OF YOUR WATCH > How to use an adjustable three-fold clasp

How to use an adjustable three-fold clasp

bandadjust1

Some bands are provided with an adjustable three-fold clasp.

If the clasp of the watch you purchased is of this type, please refer to the following instructions.

How to wear or take off the watch

  1. While pressing the push buttons on both sides of the flap, pull the band out of the movable loop and fixed loop. Then open the clasp.

  2. Special clasps B-1.1 + Special clasps B-1.1

    Fixed loop

    Movable loop

    Buckle

    Flap

    Push button

  3. Place the tip of the band into the movable loop and fixed loop, and fasten the clasp by pressing the frame of the buckle.

  4. Special clasps B-1.2

How to adjust the length of the band

  1. While pressing the push buttons on both sides of the flap, pull the band out of the movable loop and fixed loop. Then open the clasp.

  2. Special clasps B-1.1 + Special clasps B-1.1

    Fixed loop

    Movable loop

    Buckle

    Flap

    Push button

  3. Press the push buttons again to unfasten the flap.

  4. Special clasps B-2.2
  5. Pull the pin out of an adjustment hole of the band. Slide the band to adjust its length and find an appropriate hole. Place the pin into the hole.

  6. Special clasps B-2.3.1 + Special clasps A-2.3.1

    Pin

    Adjustment hole

  7. Fasten the flap.

  8. Special clasps B-2.4

The above illustrations are provided as examples. Some details may differ depending on the model.