Turn ON DST (Daylight Saving Time)
DST (Daylight Saving Time) can be manually set.
Be sure to do the settings in the following situations.
When the main-dial is adjusted using the manual time zone setting and DST (Daylight Saving Time) is implemented.
When the time zone is the same, but the settings for DST (Daylight Saving Time) differ according to the area to which you move.
The indicator’s DST (Daylight Saving Time) is not changed to “AUTO (automatic)” if you have done the manual time zone setting.
Turn DST (Daylight Saving Time) off or on manually, according to whether DST (Daylight Saving Time) is implemented or not.
-
Pull out the crown to the first click
-
Press Button A once and then release it
-
Push the crown back in
The indicator hand moves to indicate the current DST (Daylight Saving Time) setting. The seconds hand displays the current time zone.
< When DST (Daylight Saving Time) setting is OFF >
Pull out to the first click
The indicator hand moves to point to “DST”, and the hour and minute hands advance by one hour.
Press and then release
In the Lord Howe Island time zone in Australia, the time is advanced by 30 minutes while DST (Daylight Saving Time) is in effect. This watch corresponds to DST in Lord Howe Island time zone.
The seconds hand returns to the time display mode.
The indicator hand returns to display the charging status.
Push back in
Turn OFF DST (Daylight Saving Time)
Carry out operation of 
to 
in the state where DST (Daylight Saving Time) setting is ON.
In operation of 
, adjust the indicator hand to the “ST (OFF)” position as shown in the figure at the right.
The hour and minute hands return by one hour.
Check the time zone and DST (Daylight Saving Time) settings
The timezone and DST (Daylight Saving Time) can be checked for each of the main-dial and sub-dial.
Also the current time zone of the main-dial and the DST (Daylight Saving Time) can be checked by just pressing and releasing Button B.
-
Pull out the crown to the first click
-
Pull out the crown to the second click
-
Push the crown back in
The seconds hand moves to display the currently set time zone.
The indicator hand indicates DST (Daylight Saving Time) setting.
Pull out to the first click
< Display of the indicator hand >
Displays the status for DST (Daylight Saving Time).
|
Hand position |
AUTO |
ST |
DST |
|---|---|---|---|
|
Display |
 |
 |
 |
AUTO (automatic):
“AUTO (automatic)” is set when your watch successfully adjusts the time zone in a region that has adopted DST (Daylight Saving Time).
The basic time automatically changes due to your watch adapting to the implementation of DST (Daylight Saving Time) for the time zone (region) set for the main-dial.
To change the time zone setting
When you are in a place where GPS signals can be easily received
How to adjust the time zone
When you are in a place where GPS signals cannot be received
How to manually set the time zone
For the relationship between the seconds hand position and time zone, refer to the Time zone display and list of time zones around the world
The seconds hand moves to display the currently set time zone of the sub-dial. The indicator hand displays the status of DST (Daylight Saving Time) for the sub-dial.
Pull out
the crown to the second click
< Display of the indicator hand >
Displays the status for DST (Daylight Saving Time).
|
Hand position |
AUTO |
ST |
DST |
|---|---|---|---|
|
Display |
|
|
|
AUTO (automatic):
“AUTO (automatic)” is set when the main dial and sub-dial are switched after your watch successfully adjusts the time zone in a region that has adopted DST (Daylight Saving Time).
The sub-dial automatically changes due to your watch adapting to the implementation of DST (Daylight Saving Time) for the time zone (region) set for the sub-dial.
Changing the time zone settings for the sub-dial
How to manually set the time zone of the sub-dial
For the relationship between the seconds hand position and time zone, refer to the Time zone display and list of time zones around the world
The seconds hand returns to the time display mode.
The indicator hand returns to display the charging status.
Push back in