In-flight mode (
)
Set to the in-flight mode () where the reception may influence operation of other electronics devices in an airplane, etc.
In the in-flight mode (), the GPS signal reception (time zone adjustment, manual time adjustment, and automatic time adjustment) does not work.
< In-flight mode () >
The mode is displayed when the crown is pulled out to the first click.

Set to the in-flight mode (
).
-
Pull out the crown to the first click
-
Continue to press Button B (3 seconds)
-
Push the crown back in
The seconds hand will move, and the currently set in-flight mode status (42-second) / reset (0-second) will be displayed.

Pull out to the first click
Take note that turning the crown at this time will perform manual time difference setting.
The seconds hand will move to the (42-second) position.

Press for 3 seconds

Push back in
Reset the in-flight mode (
).

In operation , the seconds hand shows a
“0-second position” and you can see that
the in-flight mode () has been canceled.
Turn off the in-flight mode when leaving an airplane, etc.
If it is not turned off, the watch will not be able to receive GPS signals.
Carry out operation to
.
In operation , when the seconds hand points to the 0-second position, in-flight mode (
) is reset.