> HOW TO SET THE TIME (RADIO SIGNAL RECEPTION) > How to check the reception status

How to check the reception status

How to display the reception results

The seconds hand indicates the latest reception results (Yes/No) of a radio signal for 5 seconds.

  1. Press the button once and then release it.

  2. The seconds hand indicates the reception results.

    1B35_How to display reception results + How to display reception results

    Press the button once and then release it

    When the button is kept pressed, the watch enters the time zone adjustment mode or time difference setting mode.

  1. Check if the reception was successful (within 5 seconds).

  2. Reception_result_Y3

    If a reception was successful: The seconds hand points to Y

    (Yes: the 10-second position)

    Reception_result_N3

    If a reception has failed: The seconds hand points to N

    (No: the 20-second position)

    If the button is pressed after 5 seconds have elapsed or while the seconds hand is moving to display the reception results, the reception results display function is cancelled and the watch returns to the TIME display mode.

If a reception was successful: The seconds hand points to Y

A radio signal has been received successfully. Use the watch without any adjustments.

When the watch does not display the correct time and date even after successfully receiving a radio signal, refer to Troubleshooting.→ Misalignment of the time and hand positions, and Misalignment of the date

If reception has failed: The seconds hand points to N

Place the watch in a place where it can easily receive a radio signal, or change its direction.

Even within the radio signal reception range, this watch may fail to receive a radio signal depending on the condition (due to the influence of weather, terrain, buildings, or direction). Environments in which it is difficult to receive a radio signal

This watch is unable to receive radio signals outside the reception range. Radio signal reception range indication

Before trying to receive radio signals, check the time zone or time difference.

If the time zone or time difference is set to a region other than Japan, China, the U.S.A. or Germany, the signal reception function will not work. Check the time zone setting.

How to select the time zone (How to display the local time around the world)
How to set the time difference (How to display the local time around the world)

Attempt to receive a radio signal in a different time period. (In the case of manual reception)

Receiving environments differ according to time periods even at the same place. Due to radio signal characteristics, the watch is able to easily receive radio signals during nighttime hours.

If you use the watch in a place or region outside the radio signal reception range or when the watch cannot successfully receive radio signals, manually set the time and date.
How to manually set the time
How to manually set the date