Since the watch band touches the skin directly, it may become damaged or dirty from perspiration or dust. We recommend that you wear a watch with enough space for one finger between the watch band and your wrist.
Lack of care may accelerate deterioration of the band, cause skin irritation or stain the sleeve edge. Please follow the cautions below in order to maintain the best condition of your band as long as possible:
Even stainless steel bands / bracelets develop rust due to some corrosion / perspiration accumulating between the band / bracelet segments. This applies especially to expensive solid bracelets with gaps between the segments that are relatively narrow and may easily accumulate corrosion /
perspiration. This kind of rust may result in a yellow discoloration of your cuff when you perspire.
To prevent rust, wipe off moisture, sweat or dirt with a soft cloth when convenient. To wash the band, apply some water to metal bands / bracelets when stains on the surface are noticeable.
For heavy stains, use a tooth brush and remove the stain that has accumulated in the gaps of the band / bracelet segments . Protect the watch head from moisture entering the watch by wrapping it in plastic wrap etc. After washing, take special care to wipe the gaps of the band/bracelet segments
with a towel and dry the entire watch throughly.
* Some titanium bands use stainless steel pins which have greater durability than titanium. Therefore, even if your watch band is titanium, rust may form in the stainless steel parts. If rust advances, pins may poke out or drop out, and the watch case may fall off the band, or the clasp may not
open. If a pin is poking out, it may injure the user. In such a case, refrain from using the watch and contact an Authorized Seiko Service Center for a repair.
A leather band is more susceptible to discoloration and deterioration from moisture, sweat and direct sunlight than metal bands / bracelets. Leather straps may tear or strap colours fade. Constant care is required and this includes the circumstances in which the watch is worn. Refrain from
wearing a watch with a leather band while bathing, swimming and working with water even if the watch itself is water-resistant. In addition, take care when wearing a watch with a light-colored band, as stains will be more visible.
Wipe off moisture and sweat as soon as possible by gently rubbing it with a soft dry cloth, and place it in a well-ventillated area after removing it from the wrist. Do not expose your watch to sunlight for extened periods (eg. on a car dashboard) since this may lead to
discoloration/transformation/breakage of your watch’s leather strap.
* There are some bands with a back (or even the entire strap) made of synthetic leather, which is more resistant to perspiration compared with a genuine leather band. Nevertheless, constant care for bands is essential in any case.
A urethane band is susceptible to discoloration from light, and it may deteriorate from contact with solvents or humidity in the atmosphere. If bands remain wet and in highly humid locations or are exposed to sunlight for extended periods, the rate of deterioration may accelerate and some cracks
may appear on the band surface. In addition, a translucent, white, or pale colored band easily adsorbs other colors, resulting in color smears or discoloration. Care should be given to the condition of polyurethane bands, which are often worn for marine sports or outdoor activities.
Wash off any dirt with water and dry throughly with a dry cloth (protect the watch head from water splashes by wrapping it in plastic wrap etc.).
* When the band loses elasticity, please contact an Authorized Seiko Service Center to replace it with a new one. If you continue to use the band as it is, it may develop cracks or become brittle over time.