In the case that the watch moves abnormally or that the watch does not move at one-second intervals even after fully charging the battery, then it can be returned to normal operation using the following operation.
Reset the system
-
Pull out the crown to the second click.
-
Press and hold the button for 5 seconds and then release it.
-
When all the hands stop pointing to 12 o’clock 0 minutes and 0 seconds, push the crown back.
The seconds hand stops on the spot.
When the crown is a screw lock type, unlock it. Crown
Pull out the crown to the second click
After releasing the button, approximately 5 seconds later the seconds hand moves, and stops at the 0-second position.
Then the hour and minute hands will start to move and stop pointing to 12 o’clock 0 minutes.
The button cannot be operated until all the hands stop.
Press and hold the button for 5 seconds and then release it
The seconds hand starts moving from 12 o’clock 0 minutes and 0 seconds.
After a system reset, the time zone is set to JJY.
After completion of a system reset, perform the following operations.
Set the preliminary position for the date, and the hour and minute hands.
How to select the time zone (How to display the local time around the world)
How to conduct manual reception (Receive a radio signal manually)
When the crown is a screw lock type, lock it. Crown