> HOW TO SET THE TIME (RADIO SIGNAL RECEPTION) > Setting the time and date by receiving a radio signal

Setting the time and date by receiving a radio signal

Mechanism of radio signal reception

The radio-controlled watch displays the precise Time and Date by automatically receiving and synchronizing itself with the radio signal of an official standard frequency.

Mechanism of radio signal reception + Mechanism of radio signal reception

Transmitting Station

Cesium Atomic Clock

Official standard frequency

Radio-controlled watch

Receive radio signals through the antenna inside the watch

Analyze time information

Display the current Time and Date

Mechanism of radio signal reception V + Mechanism of radio signal reception V

Transmitting Station

Cesium Atomic Clock

Official standard frequency

Radio-controlled watch

Receive radio signals through the antenna inside the watch

Analyze time information

Display the current Time and Date

Time signal transmitted by a standard frequency is based on a super accurate “Cesium Atomic Clock” that may have a 1 second loss or gain per one hundred thousand years.

Automatic reception and manual reception

Automatic reception

This watch sets the time and date by automatically receiving a radio signal at a fixed time.

It automatically receives a radio signal before 2:00 AM, 3:00 AM and 4:00 AM.

When the reception is successful, the watch finishes the automatic reception.

Place the watch in a place where it can easily receive a radio signal (by the window, etc.).

Do not move the watch during the radio signal reception.

To improve radio signal reception

Manual reception

This watch can receive a radio signal arbitrarily at any time other than the automatic reception mode.

How to conduct manual reception

Radio signal reception results depend on the receiving environment. Environments in which it is difficult to receive a radio signal

The watch cannot receive a radio signal outside the radio signal reception range. Radio signal reception range indication

When the time difference is set for a region other than radio signal reception range, a radio signal cannot be received. Check the setting of the time difference. Setting the time difference (Setting the radio signal transmitting station)

When the watch does not display the correct time and date even after successfully receiving a radio signal, refer to Troubleshooting. Misalignment of the time and hand positions, Misalignment of the date