Push and release Button B
When Button B is pushed and released, the seconds hand moves, allowing you to check the energy level.
The energy level is displayed in four stages. Display of charging status
We recommend that you check the “energy level” on a regular basis to ensure that the watch does not do into a low energy state.
GPS signal reception requires a lot of energy. Keep in mind to regularly charge the watch by exposure to light.About charging
Reception is allowed
|
Seconds hand display |
Charging status |
Solution |
|---|---|---|
 |
full |
Reception is allowed. |
  |
middle (two levels) |
Reception is allowed, but keep in mind to charge the watch. |
After 5 seconds have elapsed or when Button B is pressed, the watch returns to the time display mode.
Reception is not allowed
|
Seconds hand display |
Charging status |
Solution |
|
|---|---|---|---|
 |
low |
The watch is unable to receive GPS signals, but has energy to operate. |
To enable reception, charge the watch until the energy level is at least “middle”. |
|
The movement of the seconds hand |
Charging status |
Solution |
|
|---|---|---|---|
|
2-second interval movement |
 |
The energy level is in a very “low” state. If the energy depletion forewarning function is activated, the “charging status” cannot be displayed. |
To keep the watch operating and also enable reception, continue charging the watch until the energy level is at least “middle”. |
|
5-second interval movement |
 |
||