About manual time difference setting (selection)
When time zone adjustment cannot be performed, the time difference can be set (selected) manually.
Using List of time differences around the world (for reference) as a guide, the watch can be matched to the time and date of your location by setting the time difference (including the date).
How to perform manual time difference setting (selection)
-
Pull out the crown to the first click
-
Turn the crown to set the watch to the time at the destination
-
Pull out the crown to the second click
-
Push the crown back in
The seconds hand will move to the 0-second position.
Pull out to the first click
When in-flight mode is set, the seconds hand will move to the 42-second position.
Each turn of the crown changes the time in 1-hour increments.
Take note of which way you turn the crown.
When the time has been set in 1-hour increments, go to operation 
Turning the crown to the right moves the time 1 hour forward.
Turning the crown to the left moves the time 1 hour backward.
To set the watch to the time at the destination, the time and date must be set. If you turn the crown in the wrong direction, change direction and reset the date and time.
A date up to about 2 weeks later (or earlier) can be displayed. Note that changing the date too far will result in a date two weeks earlier (or later).
When setting the time in 1-hour increments does not set the correct time, continue with setting the time in 15-minute increments.
Take note of which way you turn the crown.
By making adjustments 4 times, an adjustment of 1 hour can be made.
Turning the crown to the right moves the time 15 minutes forward.
Turning the crown to the left moves the time 15 minutes backward.
When in-flight mode is set, the seconds hand will move to the 0-second position.
The seconds hand returns to the time display mode.
The buttons cannot be operated while the hour, minute, and seconds hands and the date are moving.
Push back in